SAW ROAD 16″+7″GRINDER KIT 36V 81CC 5.6HP+DGA700PT2 2X5A

$9,000.01

16″ 81 cc Power Cutter,2-Stroke,5.6 HP,4.9 cu.in.+ FREE DGA700PT2 18V X2 (36V) LXT® Lithium-Ion Brushless Cordless 7″ Paddle Switch Cut-Off/Angle Grinder Kit, with Electric Brake (5.0Ah) (LIMITED TIME OFFER:OVER TT$2400.00 VALUE)

 

EK8100WS
INNOVATION : SLR Muffler recycles un-burned fuel vapor up to 15% improved fuel consumption
RELIABILITY : Start capacitor with start support function resulting in less pull start force
CONVENIENCE : On-Off-choke operation on a single lever for operator convenience
PERFORMANCE : Five stage filtration system with advanced directional air flow, for better saw performance
INCLUDES : Includes – cut-off wheel, universal wrench, Torx wrench, screwdriver, adapter ring (20mm to 1″)

 

DGA700PT2
PRODUCTIVITY : Electric brake stops the grinding or cut-off wheel in 4.5 seconds or less for maximum productivity
TECHNOLOGY : Two 18V LXT® Lithium-Ion batteries deliver corded power
CONTROL : AFT® turns the motor off if rotation of the wheel is suddenly forced to stop
COMFORT : Vibration absorbing back handle is isolated from the motor housing effectively reducing vibration
INCLUDES : (2) 18V LXT® Lithium-Ion 5.0Ah batteries, dual port rapid charger, grinding wheel, cut-off wheel, grinding wheel guard, cut-off wheel guard, side handle and tool case

 

PRODUCT DESCRIPTION

 

EK8100WS
2-stroke power cutter solution for every application.
The Makita 16″ Power Cutter (model EK8100) is a gas power cutter engineered to meet the demand for convenience and performance. The EK8100 delivers with faster starting, more power, and improved fuel economy. The EK8100 has an 81 cc engine with 5.6 HP (maximum horsepower) to take on the most demanding applications. The ignition coil with start-support function stores electrical power with each pull for easier start-ups. It’s engineered for reduced flooding with a carburetor that includes improved deco-valve and metering spring for precise fuel regulation at start up. The EK8100 also features more efficient fuel consumption with an SLR muffler that recycles unburned fuel vapor for reduced scavenging-losses and 15% improved consumption.
The EK8100 also features a five-stage foam-paper-nylon air filter system with advance directional air flow that provides cleaner air for better saw performance and easy filter cleaning and replacement. The EK8100 is engineered for professional concrete cutting applications and is ideal for landscapers, road construction crews, railroad crews, rescue crews, general steel contractors,

 

DGA700PT2
Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 (36V) LXT® Lithium-Ion Brushless 7” Paddle Switch/Angle Grinder with Electric Brake. It’s powered by two 18V Lithium-Ion batteries for 36V power and performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like grinding and cut-off applications that often call for a corded grinder. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries on the DGA700PT2 as they use across the Makita 18V LXT® cordless tool system.
The DGA700PT2 is equipped with efficiency features for maximum performance. The electric brake stops the grinding or cut-off wheel in 4.5 second or less for maximum productivity, and the Electronic Torque Control turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop. For consistent performance, Automatic Speed Change™ technology adjust speed and torque during operation. For added comfort the vibration absorbing back handle is isolated from the motor housing for reduced vibration, and the soft start feature suppresses start-up reaction for smoother start-ups and longer gear life. It has a no lock-on rear paddle trigger switch, and the anti-restart protection is engineered to prevent motor start-up when the battery is inserted with the switch locked on.

PRODUCT FEATURES

EK8100WS
Improved decompression valve and metering spring for precise fuel regulation
Start capacitor with start support function stores electrical energy resulting in significantly less pull start force
On-Off-Choke operation switch on a single lever for operator convenience
Five-stage, foam-paper-nylon system with advance direction air flow provides cleaner air for better saw performance
SLR Muffler recycles un-burned fuel vapor for reduced scavenging-losses and up to 15% improved fuel consumption
Microchip controlled carburetor designed to compensate engine timing according to work load
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground
16″ wheel capacity increases maximum cutting depth to 5-3/4″
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Aluminum guard and wheel pressure plates to reduce weight
2-mass dampening system provide reduced vibration to operator
Water supply kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank

DGA700PT2
The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 7,800 RPM
Two 18V LXT® Lithium-Ion batteries deliver corded power without leaving the 18V LXT® battery platform
Electric brake stops the grinding or cut-off wheel in 4.5 seconds or less for maximum productivity
Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
Vibration absorbing back handle is isolated from the motor housing effectively reducing vibration to the operator’s hands
Rear handle paddle switch with no lock-on feature
Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
Soft start suppresses start-up reaction for smooth start-ups and longer gear life
Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on
Weighs only 11.4 lbs. with battery for reduced operator fatigue
Rubberized soft grip handle provides increased comfort on the job
L.E.D. battery charge indicator alerts user of drained power for each of the two batteries
Large spindle lock button for easier wheel changes while wearing gloves
Protective roll cage helps protect batteries from damage due to common everyday handling
Wire mesh intake covers are engineered to prevent debris from entering motor
Tool-less wheel guard for quick and easy adjustments
Efficient internal cooling is engineered for optimum performance
Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions

INCLUDES

EK8100WS
(1) Universal Wrench (941-719-140)
(1) Torx Wrench (940-827-000)
(1) Carburetor Screwdriver (944-340-001)
(1) Adapter Ring (20mm to 1″) (394-228-121)
(1) Power Cutter Water Attachment Kit (394-365-630)

DGA700PT2
(1) 18V X2 (36V) LXT® Brushless 7” Cut-Off/Angle Grinder (DGA700Z)
(2) 18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B)
(1) 18V LXT® Lithium-Ion Dual Port Charger (DC18RD)
(1) Side Handle (143486-6)
(1) Tool Case
(1) Lock Nut Wrench (782412-6)

TECHNICAL SPECIFICATIONS

EK8100WS
Engine Displacement (cu.in./cc) : 4.9 cu.in. (81 cc)
Engine (max power) : 5.6 HP/4.2 kW
No Load Speed/Max. Spindle Speed : 9,350 / 3,820 RPM
Fuel Mixture : 50:1
Fuel Tank Capacity : 37 oz.
Arbor w/ Adaptor : 20mm/1″ adaptor
Max. Cutting Depth : 5-3/4″
Dry Weight : 23.3 lbs.
Wheel Diameter (in.) : 16″
Maximum Cut Depth (in.) : 5-3/4″
User Type : Professional
Power Type : 2-stroke gas
Wheel Diameter : 16″
Overall Length : 32-3/4″
Power Tool Product Type : Other
Shipping Weight : 34 lbs.

DGA700PT2
Wheel Diameter : 7″
Battery : 2X 18V LXT® Lithium-Ion
No Load Speed : 7,800 RPM
Spindle Type : 5/8″ – 11 UNC
Lock-On Switch : No
Lock-Off Switch : Yes
Switch Type : Rear trigger handle
Electric Brake : Yes
Variable speed dial : No
Automatic-start Wireless System (AWS™) : No
Overall Length : 19-5/8″
Net Weight (with battery) : 11.4 lbs.
Power Type : Cordless
Vibration – Surface Grinding (m/s²) : 7.5
Bind-Up Control : Yes

Reviews

There are no reviews yet.

Be the first to review “SAW ROAD 16″+7″GRINDER KIT 36V 81CC 5.6HP+DGA700PT2 2X5A”

Your email address will not be published. Required fields are marked *

    Thank you. We will be in touch with you!

    There was an error while trying to send your request. Please try again.

    G-tools will use the information you provide on this form to be in touch with you and to provide updates and marketing.